Nothing looks more stunning in an open-plan kitchen or family room than bifold doors. They are hugely popular in modern homes, and no renovation job is complete without adding them.
They let the light flood into the room, making it look bigger than it really is and creating an inviting space to spend time in. They are wonderful for entertaining on warm summer evenings and keep out the cold throughout the winter.
To keep your bifold doors in tip-top condition and to show them off properly, they need to be kept scrupulously clean. Here are some essential tips for keeping your bifold doors looking immaculate.
Cleaning the Glass in Bifold Doors
Dublin windows and doors always look great when the sun is streaming in through them, but choose a cloudy day to clean them. If you clean them on a sunny day, the glass will be warm and your cleaning fluid will dry too quickly. This leaves streaks on the glass.
Dust and particles can build up on the interior and exterior surfaces. Inside, there will be normal household dust from soft furnishings and possibly pets. Outside, particulates from air pollution can build up on glass surfaces. According to the World Health Organisation, small particles of dust from industry and car exhausts are a problem in most cities.
An initial dusting will remove the worst of the grime. You can wipe inside surfaces over with a soft cloth, but outside you may need some cold water. Always start at the top and work your way down.
Then use a commercial window cleaning solution or add a half a cupful of vinegar to a bucket of water and use this solution. Wipe off with a microfibre cloth. You could also use a squeegee with a blade that will scrape off the cleaning solution.
Don’t Forget Frames, Tracks and Seals
Once you have invested in beautiful bifold doors such as those provided by http://www.keanewindows.ie/, it makes sense to keep them looking and working at their best.
Frames simply need a careful wipe with a soft cloth and warm water. Never use an abrasive pad – stubborn stains should be tackled with an ink rubber. Once a month, check the tracks and the seals for debris and clean them out with a vacuum cleaner nozzle.